Skip to content
TJM Home Improvements
A new dark tiled roof and dormer on a brick house, scaffold still up

New Roofs - Feltham TW13

New Roofs in Feltham

Stripped back, checked over and rebuilt properly, from the membrane up. Covering Feltham and Hounslow, Ashford, Hanworth.

Ask about new roofs in Feltham

Tell us what is happening and we will come and look.

The work

New Roofs for Feltham homes

Feltham is a short run for us, so a look at a new roofs job here is a visit rather than a day of travel priced into the quote. We work across TW13 and out into Hounslow, Ashford, Hanworth, Bedfont, Hampton.

When a roof has had its last patch, replacing the covering costs less than another five years of call-outs. We strip the old tiles or slates, take the felt off and look at the battens and rafters underneath, because that is where the real condition of a roof shows.

From there the roof goes back together in the right order: breathable membrane, new treated battens, the covering you have chosen, and lead or proprietary flashings at every abutment. Ridge and hip lines are finished dry rather than bedded in mortar, so there is nothing to crack and drop out in a few winters.

Concrete tiles set out on new battens over a fresh underlay

What's included

What new roofs covers

  • Strip and clear

    The old covering, felt and battens come off and go straight into the skip, not onto your garden.

  • Timber check

    Rafters, wall plates and spar ends are inspected with the roof open. Anything soft gets reported before we cover it up.

  • Membrane and battens

    Breathable underlay and new treated battens, gauged to the covering so the tiles sit where they should.

  • The covering

    Plain tile, interlocking concrete, natural or fibre-cement slate. We fit what suits the pitch and the street, not one house spec.

  • Flashings and detailing

    Lead or approved alternatives at chimneys, valleys, abutments and around any roof window.

  • Ventilation

    Eaves and ridge ventilation set up so the roof space breathes and moisture has somewhere to go.

The options

New Roofs in Feltham: which system

We fit all of these across Feltham. Which one suits depends on the roof you have, the span, and what you want out of it - so here is the honest difference between them.

Tiled roofs

Clay and concrete tiles last a long time when the roof under them is sound. What usually gives up first is the fixing and the detailing: nails corroding, battens softening, and mortar bedding on the ridge and hips cracking away.

We fit complete tiled roofs in plain tile or interlocking concrete, over breathable membrane and new treated battens, and we match existing profiles wherever the product is still made.

Plain and interlocking tile
Laid over breathable membrane and new treated battens, ridge and verge dry fixed.
Valleys
Lead or GRP valley linings renewed where the old one has split or silted up.
A finished terracotta tiled roof with a dry fixed ridge line

Slate roofs

A slate roof usually fails at its fixings long before the slate itself wears out. Nail sickness is the common story: iron nails corrode, slates start to slide, and someone clips a lead tingle on to hold them. A roof with tingles across it is telling you it wants re-slating.

We re-slate in natural Welsh or Spanish slate, and in fibre-cement where budget or weight makes that the sensible choice. Headlap is set for the pitch, slates are holed and nailed in copper, and hips, valleys and abutments are finished in lead.

Full re-slating
Strip, new membrane and battens, then slate laid to the correct headlap for the pitch.
Salvage and reuse
Where existing slate is sound we sort and re-lay what we can, then make up the shortfall.
A natural slate roof re-laid with copper nails and lead detailing

Dry ridge and dry verge

Bedding ridge tiles in mortar was standard for a century, and it has one weakness: the roof moves and the mortar does not. Hairline cracks open, water gets behind the tile, frost widens the crack, and a section of ridge ends up loose.

Dry fixing solves it differently. A ventilated ridge roll seals the gap and lets air out of the roof space, and every ridge tile is screwed to a batten through a clamp. Nothing relies on mortar, and the ridge line stays put in wind. We fit it as standard on anything we rebuild, and as a standalone job on a roof that is otherwise sound.

Ventilated ridge roll
Laid over the apex to seal the gap and vent the roof space, every tile screwed through a clamp.
Dry verge units
Interlocking verge caps to replace failed mortar at the gable end.
A dry fixed ridge line with mechanical clamps over a ventilated roll

The process

How a new roofs job runs in Feltham

  1. Step 01

    Look at the roof

    We come out, get up where we need to, and tell you whether the roof needs replacing or repairing.

  2. Step 02

    Written quote

    A price in writing naming the covering, the access and what is included, so you can compare it with anyone else.

  3. Step 03

    Access and protection

    Scaffold goes up and the areas below get covered before a single tile moves.

  4. Step 04

    Strip, rebuild, clear

    The roof is rebuilt in stages so it is never left open, then the site is swept and the scaffold comes down.

Next step

Get a price for new roofs in Feltham

Send the form or ring 0208 945 5563. We will come and look at what you actually have, then put a figure in writing.

Our work

Read the reviews, then look at the jobs

What customers have said about the work, collected from the places they left it.

Read customer feedback straight from our MyBuilder profile, where every review is tied to a job we were hired for, and see finished work on Instagram as it comes off the scaffold.

Why TJM

Why Feltham customers use us for this

  • You talk to the roofer doing the work, not a call centre.
  • Dry ridge and dry verge as standard, so there is no mortar left to fail later.
  • The roof is never left open overnight without cover.
  • Finished jobs are on our MyBuilder profile and Instagram if you want to see the standard first.
A finished concrete tiled roof over red brickwork

The price

New Roofs costs

What new roofs costs comes down to what you actually have, not a price list. Two jobs that sound identical can be an hour of work or a week of it, which is why we do not price roofing over the phone. We come and look, then put a figure in writing.

  • Roof size and pitch, and how many valleys, hips and dormers it has.
  • The covering you choose: concrete interlocking, plain tile, fibre-cement or natural slate.
  • Access, and whether the scaffold needs a pavement licence.
  • Anything found once the roof is open, such as split rafters or rotten spar ends.

On the job

New Roofs across Feltham

We cover Feltham TW13 and the streets around it - Hounslow, Ashford, Hanworth, Bedfont, Hampton - so most new roofs jobs here are a short journey rather than a day of travel priced into the quote.

If your job crosses into another trade, that is still one price and one person responsible for the order the work happens in. Roofing, brickwork, render and groundwork are all done in house.

  • You talk to the roofer doing the work, not a call centre.
  • Dry ridge and dry verge as standard, so there is no mortar left to fail later.
  • The roof is never left open overnight without cover.
A new tiled roof with rooflights and a brick chimney

Questions

New Roofs in Feltham: common questions

Still not sure? Ring and ask. It is usually quicker than typing it out, and you will speak to the person who would do the work.

How long does a re-roof take?

A straightforward terraced or semi-detached roof is usually about a week on site once the scaffold is up. More valleys, dormers and chimneys mean longer, and we give you the expected run of days with the quote.

Do I need scaffolding?

For a full re-roof, yes. Stripping a roof from a ladder is neither safe nor accurate, and the scaffold cost is written into the quote rather than added later.

Can you match the tiles on the rest of the street?

Usually. Many West London roofs are a recognisable pattern of plain tile or slate. If an exact match is no longer manufactured we will tell you at the quote stage and show you the closest current product.

Will a new roof need building control approval?

Replacing more than a quarter of a roof covering is notifiable work under the building regulations, so most full re-roofs are. Confirm with us at the quote stage how the notification is being handled on your job, because it decides what paperwork you end up with.

Can I stay in the house while the roof is replaced?

Yes. It is noisy and there is scaffold up, but the roof is never left open, so the house stays weathertight throughout. Cover or move anything stored in the loft, because stripping a roof brings down a lot of dust.

Looking for a service other than New Roofs in Feltham TW13?

We cover the whole outside of the house for our Feltham customers:

Not in Feltham? Still looking for New Roofs near you?

We also cover Greenford, Hounslow, Kew, Hanwell, Twickenham and more:

We also provide new roofs to Hounslow, Ashford, Hanworth, Bedfont and the streets around them.

Call nowGet a quote