Skip to content
TJM Home Improvements
An EPDM rubber membrane being dressed down onto a new flat roof deck

Rubber Roofs - Twickenham TW1

Rubber Roofs in Twickenham

One sheet, no field seams, bonded down over insulation and proper falls. Covering Twickenham and Richmond, St Margarets, Teddington.

Ask about rubber roofs in Twickenham

Tell us what is happening and we will come and look.

The work

Rubber Roofs for Twickenham homes

Twickenham is a short run for us, so a look at a rubber roofs job here is a visit rather than a day of travel priced into the quote. We work across TW1 and out into Richmond, St Margarets, Teddington, Hampton, Isleworth.

EPDM is a synthetic rubber membrane supplied in wide sheets. On a typical garage or extension roof it goes down as one piece, bonded to the insulation or deck, with the edges dressed into trims and taken up the abutments.

It stays flexible in cold weather, it is not degraded by ultraviolet light the way old felt was, and because there are no joints in the middle of the roof there is nothing there to fail. Corners and outlets are made up with matching flashing pieces.

A roll of EPDM membrane being set out on a flat roof

What's included

What rubber roofs covers

  • Deck preparation

    Old covering off, deck repaired, and a smooth substrate for the membrane to bond to.

  • Falls and insulation

    Firrings or tapered insulation so water runs off, with the insulation upgraded where possible.

  • Single-sheet membrane

    EPDM cut to the roof and bonded down, in one piece wherever the roof allows.

  • Trims and edges

    Aluminium or GRP edge trims, drips and kerbs finished neatly.

  • Corners and penetrations

    Pre-formed corners and pipe flashings bonded and rolled.

The process

How a rubber roofs job runs in Twickenham

  1. Step 01

    Measure and check

    We check whether the roof can be covered in a single sheet, which is the main advantage.

  2. Step 02

    Quote

    A price naming the membrane, insulation and trims, and how the abutments are finished.

  3. Step 03

    Fit

    Deck sorted, insulation laid, membrane bonded and rolled, edges trimmed.

  4. Step 04

    Test the outlets

    Water run to the outlet to confirm the fall, then the site cleared.

Next step

Get a price for rubber roofs in Twickenham

Send the form or ring 020 3128 7577. We will come and look at what you actually have, then put a figure in writing.

Our work

Read the reviews, then look at the jobs

What customers have said about the work, collected from the places they left it.

Read customer feedback straight from our MyBuilder profile, where every review is tied to a job we were hired for, and see finished work on Instagram as it comes off the scaffold.

Why TJM

Why Twickenham customers use us for this

  • Single-sheet coverage wherever the roof geometry allows it.
  • No hot works, which suits a roof next to timber cladding or a window.
  • Insulation and falls dealt with, not just a new skin over old problems.
  • Manufacturer-matched trims and corner pieces rather than improvised details.
A finished rubber flat roof over a rear extension with a white fascia

The price

Rubber Roofs costs

What rubber roofs costs comes down to what you actually have, not a price list. Two jobs that sound identical can be an hour of work or a week of it, which is why we do not price roofing over the phone. We come and look, then put a figure in writing.

  • Roof area, and whether one sheet covers it.
  • Deck repairs found once the old covering is off.
  • Insulation thickness the build-up allows.
  • Number of penetrations, kerbs and upstands.

On the job

Rubber Roofs across Twickenham

We cover Twickenham TW1 and the streets around it - Richmond, St Margarets, Teddington, Hampton, Isleworth - so most rubber roofs jobs here are a short journey rather than a day of travel priced into the quote.

If your job crosses into another trade, that is still one price and one person responsible for the order the work happens in. Roofing, brickwork, render and groundwork are all done in house.

  • Single-sheet coverage wherever the roof geometry allows it.
  • No hot works, which suits a roof next to timber cladding or a window.
  • Insulation and falls dealt with, not just a new skin over old problems.
An EPDM termination bar fixed along a wall upstand

Questions

Rubber Roofs in Twickenham: common questions

Still not sure? Ring and ask. It is usually quicker than typing it out, and you will speak to the person who would do the work.

How long does EPDM last?

The membranes we fit carry long manufacturer life expectancies, and the failure point on a rubber roof is nearly always a detail at the edge rather than the sheet itself. That is why we spend the time on trims and upstands.

Can I walk on it?

For maintenance access, yes, carefully and without dragging anything sharp across it. If the roof is going to be used as a terrace it needs a walkway or paving system designed for that, which changes the build-up.

Does it come in grey rather than black?

Standard EPDM is black. If the roof is overlooked from above and appearance matters, there are lighter single-ply alternatives and we can price one.

Can EPDM be laid in cold weather?

It is more tolerant than felt or fibreglass because nothing has to cure and there is no flame, but the adhesives still have minimum temperatures. In a cold snap we will tell you if it is worth waiting a few days.

What happens where the rubber meets the house wall?

The membrane is taken up the wall as an upstand and finished under a flashing or into a chase, never just stuck onto render. That junction is where flat roofs leak, so it gets the most attention.
Call nowGet a quote